Service

INSTRUCTION:

Closing a halter

 

INSTRUCTION:

Easy-Locking System

The patented Easy-Locking system enables the length of a rope to be adjusted without a metal connection.

The rope runs through the fixed outer sheath. The length is adjusted (longer/shorter) by holding the fixed outer sheath lightly and pulling the rope to the left or right, if necessary up or down.

Once the desired length has been set, smooth the fixed outer sheath again and secure the rope.

INSTRUCTION:

OneSize

Fig. 1: The rope loop with the attached rope forms the nose of the One Size.

This is pulled over the bridge of the nose and allows the size of the halter to be adjusted by sliding the outer sheath up or down.

Fig. 2: The rear rope loop is placed over the ears of the horse's head as a headpiece.

The size of the headpiece can be adjusted at this point by sliding the eyelet back and forth.

Fig. 3: Adjust the halter to the size of the horse's head.

Important!
To relieve the constant pressure on the bridge of the nose, a knot must be attached to the lower part of the One Size.

The end of the rope is passed through the lower rope loop and pulled through the newly created loop and secured as a knot.